Can I Use Kmc Missing Link On Shimano Chain

If your chain is compatible with 9-speed Shimano cassettes, then you can use the KMC Missing Link on your Shimano chain. The KMC Missing Link is a quick and easy way to connect or disconnect your chain without the need for any tools. It is also compatible with other brands of 9-speed chains, so you can use it on your bike no matter what brand of chain you have.

  • Preparation: You will need a Shimano chain and a KMC missing link
  • Identify the direction of the chain: The chain will have an arrow on one side, pointing in the direction of travel
  • This is the side that the KMC missing link will go on
  • Attach the KMC missing link: Once you have determined which side the KMC missing link goes on, simply press the two halves together until they snap into place
  • Test the connection: Before you put the chain back on your bike, test the connection by pulling on it from both sides
  • It should be secure and not come apart easily
  • Install the chain on your bike: Once you’ve confirmed that the KMC missing link is secure, you can install the chain back on your bike
  • Make sure that the chain is routed correctly through all the derailleurs and pulleys before you start pedaling

Can I use KMC master link on Shimano chain?

There is a lot of debate surrounding the compatibility of KMC and Shimano chains, with many people wondering if a KMC master link can be used on a Shimano chain. The answer is yes, you can use a KMC master link on a Shimano chain, but there are a few things to keep in mind. First, it is important to note that not all KMC master links are compatible with Shimano chains.

The KMC MissingLink ML-1 is the only KMC master link that is compatible with Shimano chains. This master link is specifically designed for use with Shimano chains, and will work with all Shimano chains, including 10, 9, and 8-speed chains. It is also important to note that you can only use a KMC master link on a Shimano chain if the chain is new.

If you try to use a KMC master link on an old Shimano chain, the link will not stay in place and the chain will eventually come apart. So, if you have a new Shimano chain and you want to use a KMC master link, the ML-1 is the only link that you can use. Keep in mind, however, that you can only use this link on a new chain, and that you should always follow the instructions that come with the link to ensure proper installation.

Can you use quick links with Shimano chain?

Yes, you can use quick links with Shimano chain. Quick links provide a convenient way to remove and reattach your chain without the need for special tools. Shimano quick links are compatible with all Shimano 10-speed and 11-speed chains.

What chains are compatible with Shimano?

There are a few ways to determine if a chain is compatible with your Shimano drivetrain. The first is to look at the chain itself. All Shimano compatible chains will have the “Shimano” logo on the inner plates.

If you don’t see this logo, the chain is not compatible. Another way to determine compatibility is by looking at the chainring teeth. Shimano uses a unique tooth profile that is not compatible with other brands.

If you see teeth that look similar to Shimano’s, they will likely be compatible. The last way to determine compatibility is by looking at the chain’s compatibility chart. Shimano publishes a compatibility chart that lists which chains are compatible with which drivetrains.

This is the most reliable way to determine compatibility. In general, Shimano chains are only compatible with Shimano drivetrains. However, there are a few exceptions.

Some aftermarket chains from companies like KMC and SRAM are compatible with Shimano drivetrains. These chains usually have special plates that are compatible with Shimano’s tooth profile. If you’re unsure about compatibility, it’s always best to consult the compatibility chart or ask a knowledgeable salesperson before making a purchase.

Can I use a Shimano chain pin on a KMC chain?

There are a few things to consider when mixing and matching parts from different brands on your bike. With chains, one of the main compatibility concerns is the width of the inner and outer plates. Shimano and KMC chains use different plate widths, so a Shimano chain will not work with a KMC chain.

However, you can use a Shimano chain with a KMC chainring. The reason for this is that Shimano and KMC use the same width for their inner chainring plates. So, as long as your chainring is compatible with your Shimano chain, you should be good to go.

When it comes to other bike components, it’s always best to consult with your local bike shop to see if mixing and matching brands is okay. In some cases it is, and in others it voids certain warranties. So, it’s always best to err on the side of caution and get the green light from a professional before making any major changes to your bike.

can i use kmc missing link on shimano chain


Are quick links interchangeable?

Quick links are not universally interchangeable between different chain brands or speeds. While some quick links may work with multiple chain brands and speeds, it is crucial to use a quick link that is specifically designed and compatible with your particular chain.

Different chain manufacturers often have variations in their chain designs, such as varying pin dimensions, widths, and shapes. Additionally, the number of speeds in the drivetrain system affects the spacing and dimensions of the chain. Therefore, using an incompatible quick link can lead to poor shifting performance, chain failure, or even accidents.

To ensure proper compatibility and safety, it is recommended to use quick links that are specifically designed for your chain brand and speed. Consult the manufacturer’s instructions or compatibility guidelines to determine the appropriate quick link for your chain. This information is typically available on the packaging of the quick link or on the manufacturer’s website.

By using the correct quick link, you can ensure reliable and safe performance of your bicycle chain.

Kmc chain

KMC chain is a chain that is used on bicycles. It is a chain that is made out of steel. It is a chain that is used to connect the pedals to the wheel.

It is a chain that is used to keep the bicycle in place.


If you’re using a Shimano chain, you can use the KMC Missing Link. The Missing Link is a quick and easy way to connect your chain without having to use a chain tool.


3 thoughts on “Can I Use Kmc Missing Link On Shimano Chain”

  1. Pingback: How To Run A Chain Through A Derailleur - Hedcycling Europe

  2. Pingback: Can You Reuse Sram Powerlock - Hedcycling Europe

  3. Pingback: How To Tighten Cassette On Mountain Bike - Hedcycling Europe

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top