Many mountain bikers ask themselves whether they can put downhill forks on a hardtail. The answer is yes, you can put downhill forks on a hardtail, but there are a few things to keep in mind. First, the headtube on a hardtail is typically not as long as the headtube on a full-suspension bike, so you may need to use a headset with a longer top race.

Second, the crown race on a downhill fork is often taller than the crown race on a cross-country fork, so you may need to use a headset with a taller bottom race. Finally, downhill forks are often much heavier than cross-country forks, so your hardtail may end up being significantly heavier than it was before.

Can you put dual crown forks on a hardtail?

It is possible to put dual crown forks on a hardtail frame, but it is not recommended. Dual crown forks are designed for full-suspension bikes, and their extra weight and height can throw off the balance of a hardtail. Additionally, the increased fork travel of a dual crown fork will likely bottom out on a hardtail frame, meaning the forks will not provide any suspension at all.

If you are dead set on putting dual crown forks on your hardtail, be sure to check that the fork will fit in the frame and that the frame can handle the extra weight and height.

Can you put 160mm forks on a hardtail?

Hardtails are designed to be used with 80-100mm forks, anything longer will adversely affect the handling. That being said, there are a few hardtails on the market that are designed to work with longer forks, typically around 140mm. These hardtails have longer head tubes and wheelbases to accommodate the longer forks and usually have steeper head angles as well.

So if you’re looking to put a longer fork on your hardtail, make sure to do your research and make sure your frame can accommodate it.

Can you make a hardtail into a full suspension?

A hardtail mountain bike has a suspension fork in the front, but no rear suspension. A full suspension mountain bike has both front and rear suspension. It is possible to convert a hardtail mountain bike into a full suspension mountain bike, but it is not a simple task.

There are a few different ways to go about converting a hardtail mountain bike into a full suspension mountain bike. One option is to replace the fork with a suspension fork and then add a rear suspension system. This can be done by either replacing the rear triangle of the frame or by attaching a rear suspension system to the frame.

Another option is to replace the entire front triangle of the frame with a suspension fork. This will give you a full suspension mountain bike, but it will also be a more expensive option. The third option is to add a rear suspension system to a hardtail mountain bike frame.

This can be done by attaching a rear suspension system to the frame or by replacing the rear triangle of the frame. This will give you a full suspension mountain bike, but it will also be a more expensive option. No matter which option you choose, converting a hardtail mountain bike into a full suspension mountain bike will require some work.

It is best to consult with a professional before undertaking such a project.

Can you put any forks on a mountain bike?

There are a few different types of forks that can be used on a mountain bike. The most common type is the suspension fork, which helps to absorb the shocks from bumps and rough terrain. There are also rigid forks, which are made of solid metal and do not have any suspension.

These are typically used on cross-country or racing bikes. Some mountain bikes also come equipped with a fork that has both suspension and rigid sections. This is known as a dual-suspension or full-suspension fork.

Generally speaking, any type of fork can be used on a mountain bike as long as it is the correct size and has the right amount of travel ( suspension height). Some forks may need to be adjusted or replaced to achieve the proper fit and function.

can you put downhill forks on a hardtail

Credit: m.pinkbike.com

Hardtail on downhill

Hardtail on downhill? It may sound counterintuitive, but it can actually be done – and it can be done quite well. A hardtail mountain bike is a bike that has no rear suspension.

That means that all of the shock from the terrain is absorbed by the rider and not by the bike. Many people think that a hardtail is only good for cross-country riding, but that’s not the case. Hardtails can actually be quite good for downhill riding – as long as you know how to set them up properly.

Here are a few tips for setting up your hardtail for downhill riding: 1. Choose the right frame. The first step is to choose the right frame.

You want a frame that’s designed for downhill riding, not for cross-country riding. Some things to look for in a downhill frame are a lower bottom bracket (for stability), a steeper head angle (for more control), and a longer wheelbase (for more stability). 2. Choose the right fork.

The next step is to choose the right fork. For downhill riding, you want a fork that has more travel than a cross-country fork. A good rule of thumb is to choose a fork that has about 10% more travel than the frame.

So, if you have a downhill frame with 150mm of travel, you want a fork with 160mm of travel.

Conclusion

It’s a common question among mountain bikers – can you put downhill forks on a hardtail? The answer is yes, you can, but there are a few things to keep in mind. First, your hardtail frame may not have the clearance for the larger forks.

Second, the extra weight of the forks may make your hardtail harder to ride. And finally, the forks may change the geometry of your bike, making it handle differently. So, if you’re thinking about putting downhill forks on your hardtail, just be sure to do your research first.

You may also like...

4 Comments

  1. […] right way and a wrong way to do it? The wrong way to hang your bike is by the front wheel. This can put unnecessary strain on the frame and fork, and can even cause the front wheel to come off if it’s not properly secured. The right way […]

  2. […] aspects is ensuring that your fork is properly inflated. But how do you know how much air to put in your fork? The amount of air you should put in your fork depends on a few factors, including your weight, […]

  3. […] 26″ mountain bike to a new 27.5″ wheel size, you might be wondering if you can simply put a 27.5″ fork on your existing frame. The answer is yes, in most cases you can indeed put a 27.5″ fork on a […]

  4. […] is performing at its best and will give you a smoother ride. Here is a step-by-step guide on how to put air in a suspension fork: 1. Start by removing the cap from the air valve on your fork. 2. Using a shock pump, pump air into […]

Leave a Reply

Your email address will not be published.