Assuming you would like a blog post discussing how to measure spindle length on a spinning wheel:
There are a few different ways that you can measure the spindle length on your spinning wheel. The first way is to measure from the tip of the spindle to the bottom of the whorl.
To do this, you will need to remove the spindle from the wheel. Another way to measure spindle length is to measure from the top of the spindle (where it meets the orifice) to the bottom of the whorl. This measurement will be slightly different than the first method, but will still give you a good idea of the spindle length.
The last way to measure spindle length is to measure from the top of the spindle to the bottom of the spindle. This is the most accurate way to measure spindle length, but it can be a little more difficult to do.
- Using a tape measure, measure the distance from the top of the spindle to the bottom
- Measure the distance from the top of the spindle to the bottom of the flange
- Measure the distance from the bottom of the spindle to the bottom of the flange
- Add the three measurements together to get the total spindle length
How To Measure Crank Spindle Length
What is spindle length?
Spindle length is the distance from the tip of the spindle to the centerline of the chuck. It is important to know the spindle length when choosing a lathe because it determines the maximum workpiece length that can be turned. The most common lathe spindle lengths are 16″, 18″, 20″ and 24″.
Are all crank spindles the same length?
Crankshafts, or crank spindles, come in a variety of lengths. The most common length is 170mm, but other popular lengths include 165mm, 175mm, and 180mm. There are also a few specialty lengths, such as 158mm and 190mm, but these are less common.
So, to answer the question, no, not all crank spindles are the same length.
Does crank spindle length matter?
When it comes to crank spindles, there are two schools of thought: those who believe that longer spindles offer greater pedaling efficiency, and those who believe that shorter spindles provide a more powerful pedaling stroke. So, does crank spindle length matter?
The answer, it turns out, is a bit of both.
Let’s take a closer look.
Longer spindles do offer greater pedaling efficiency, as they allow for a greater Q-factor (the distance between the pedals). This, in turn, results in less foot, ankle and knee stress as well as fewer hip impingements.
However, shorter spindles provide a more powerful pedaling stroke, as they allow for a greater leverage. This results in more force being applied to the pedals, which can be helpful when climbing steep hills or sprinting.
So, which is best?
What cranks have a 30mm spindle?
There are a few different cranksets that have a 30mm spindle. Some examples include the SRAM GXP, Shimano Hollowtech II, Race Face Cinch, and Praxis Works M30. Each of these cranksets has its own unique features and benefits.
The SRAM GXP crankset is made from forged aluminum and features a two-piece design. It is compatible with both GXP and BB30 bottom brackets. The Shimano Hollowtech II crankset is made from forged aluminum and features a two-piece design.
It is compatible with both Hollowtech II and BB30 bottom brackets. The Race Face Cinch crankset is made from forged aluminum and features a one-piece design. It is compatible with both Cinch and BB30 bottom brackets.
The Praxis Works M30 crankset is made from forged aluminum and features a two-piece design.
Credit: wheelsmfg.com
How to measure spindle length on window handle
Window handle spindle length can be measured a few different ways depending on the type of window. For casement windows, measure from the top of the window to the center of the spindle. For double hung windows, measure from the top of the window to the bottom of the spindle.
For awning windows, measure from the top of the window to the center of the spindle. Sliding windows are a little different, measure from the top of the window to the bottom of the spindle.
How to measure crank spindle length
If you’re a cyclist, then you know that one of the most important factors in achieving optimal performance is having the correct crank spindle length. But how do you go about measuring this? In this blog post, we’ll walk you through the process of measuring crank spindle length, so that you can get it just right for your next ride.
To start, you’ll need a few tools: a tape measure, a marker, and a piece of paper. You’ll also need to know the width of your bottom bracket shell. With these things in hand, you’re ready to measure.
First, find the center of your bottom bracket shell and mark it with your marker. Then, measure from this point to the center of the crank spindle. This measurement is your crank spindle length.
Once you have your crank spindle length, you can use it to select the correct-sized crankset for your bike.
How to calculate bottom bracket spindle length
If you’re looking to calculate bottom bracket spindle length, there are a few things you’ll need to keep in mind. First, you’ll need to know the width of your bottom bracket shell. This is typically either 68 or 73 millimeters.
Once you have that measurement, you can use a simple formula to calculate the appropriate spindle length. For a 68mm bottom bracket shell, you’ll need a spindle that is approximately 113mm long. For a 73mm bottom bracket shell, you’ll need a spindle that is approximately 118mm long.
Keep in mind that these are general guidelines and that your specific bike may require a slightly different spindle length. If you’re unsure, it’s always best to consult with a professional before making any changes to your bike.
Sram dub spindle length
If you’re a mountain biker, then you’re probably familiar with SRAM’s DUB bottom bracket standard. What you may not know is that there are actually two different spindle lengths available for DUB-equipped cranksets:
The longer spindle is designed for use with Boost-equipped frames.
This spindle length is 51mm, and it provides increased clearance between the chainring and the frame.
The shorter spindle is designed for use with non-Boost frames. This spindle length is 48.5mm, and it provides more tire clearance and a tighter Q-factor.
So, which spindle length should you choose? That depends on your frame and your riding style. If you’re not sure which one to go with, your best bet is to ask your local bike shop for advice.
Spindle length for 73mm bottom bracket
There are a few things to consider when selecting the correct spindle length for your 73mm bottom bracket. The first is the type of bottom bracket you have. There are two main types of bottom brackets, cartridge and cup-and-cone.
Cartridge bottom brackets are usually found on newer bikes and are a sealed unit that houses the bearings inside. Cup-and-cone bottom brackets are the more traditional type and have bearings that sit outside the bottom bracket shell.
The second thing to consider is the crank arm length.
The crank arm is the part of the bike that the pedals attach to. The standard crank arm lengths for road bikes are 170mm, 172.5mm, and 175mm. If you have a cartridge bottom bracket, you will need to know the crank arm length to select the correct spindle length.
For cup-and-cone bottom brackets, you will need to know the bottom bracket shell width.
Mtb crank spindle length
Mountain bike crank spindle length is an important factor to consider when choosing a mountain bike crank. The crank spindle is the part of the crank that attaches to the bottom bracket. The length of the crank spindle will determine how wide the Q-factor of the bike is.
The Q-factor is the distance between the inside of the crank arms. A wider Q-factor will make the bike feel more stable, while a narrower Q-factor will make the bike feel more agile. The length of the crank spindle will also affect the bike’s gearing.
A longer crank spindle will give the bike a lower gear ratio, while a shorter crank spindle will give the bike a higher gear ratio.
Sram bb30 spindle length
When it comes to choosing the correct spindle length for your SRAM BB30 bottom bracket, there are a few things to keep in mind. First, you’ll need to know the shell width of your frame. BB30 bottom brackets have a wider shell than standard bottom brackets, so you’ll need to make sure your frame can accommodate the wider BB.
Once you know your frame’s shell width, you can then choose the correct spindle length based on your crankset. SRAM offers two different spindle lengths for BB30 bottom brackets, so be sure to check which size is recommended for your particular crankset.
If you’re unsure of your frame’s shell width or you’re not sure which spindle length to choose, your best bet is to consult with your local bike shop.
They’ll be able to help you choose the correct parts for your bike and ensure that everything is properly installed.
How to measure spindle size bike
When shopping for a new or used bike, you’ll need to know how to measure spindle size. The spindle is the metal rod that connects the pedals to the crank arms. It’s important to know the size of your spindle so that you can buy the correct-sized pedals.
Here’s a step-by-step guide to measuring spindle size:
1. Place the bike on a level surface and stand next to it.
2. Find the crank arms on the bike.
These are the metal rods that connect the pedals to the spindle.
3. Measure the distance between the center of the crank arms. This measurement is the spindle size.
4. Use this measurement to buy the correct-sized pedals for your bike.
Now that you know how to measure spindle size, you’ll be able to buy the correct-sized pedals for your bike. Happy riding!
Conclusion
To measure spindle length, first find the center of the spindle. To do this, measure the diameter of the spindle at its widest point. Divide this measurement by 2 to find the center.
Once you have the center, measure from the center to the end of the spindle. This is the spindle’s length.
