Assuming you would like tips on how to inflate your RockShox Recon fork: One way to do this is by using a shock pump. If you don’t have a shock pump, you can use a floor pump with a Schrader valve attachment.

Another way to do it is by using a compressor with a Schrader valve adapter. First, you’ll want to unscrew the cap on top of the left fork leg. There will be a Schrader valve underneath.

Once the cap is off, use your shock pump to pump air into the fork until it reaches the desired pressure. The pressure will be written on the side of the fork leg. If you’re using a floor pump, you’ll want to attach the Schrader valve attachment to the pump before you start pumping.

If you’re using a compressor, you’ll want to screw the Schrader valve adapter onto the valve before you start pumping air in.

  • Locate the Schrader valve on the bottom of the air-spring chamber
  • Unscrew the valve cap
  • Connect a shock pump to the valve
  • Pump air into the chamber until the desired air pressure is reached
  • Screw the valve cap back on

How to put air in a bike fork

How do you set up RockShox Recon?

There are a few different ways to set up your RockShox Recon forks. The first step is to choose the right spring rate for your weight and riding style. Next, you’ll need to set the sag on your forks.

This is the amount that the forks compress when you sit on your bike. You can find the recommended sag setting for your forks in the owner’s manual. Once you have the sag set, you’ll need to adjust the rebound damping.

This controls how fast the forks spring back after they compress. Again, you can find the recommended settings in the owner’s manual. Finally, you’ll need to air up your forks to the recommended pressure.

This is usually around 20-30 PSI. Once you have all of these settings dialed in, you should have a great ride!

How do you put air in a suspension fork?

If you have a suspension fork on your bike, it is important to know how to properly put air in it. Doing so will ensure that your fork is performing at its best and will give you a smoother ride. Here is a step-by-step guide on how to put air in a suspension fork:

1. Start by removing the cap from the air valve on your fork. 2. Using a shock pump, pump air into your fork until it reaches the desired pressure. 3. Once the desired pressure is reached, screw the cap back onto the air valve.

4. That’s it! You’re now ready to hit the trails with your properly inflated suspension fork.

How much air do I put in my RockShox?

This is a great question, and one that many people ask. There are a few things to keep in mind when setting the air pressure in your RockShox. First, you’ll need to know the travel of your fork.

The travel is the measurement from the bottom of the stanchion tubes to the top of the crown. You can find this measurement in the RockShox manual or on their website. Once you know the travel, you can set the air pressure.

For air pressure, start with the recommended pressure from RockShox. You can find this pressure in the manual or on their website. Once you have the recommended pressure, you can start to experiment with different settings.

A good starting point is 10-20% less than the recommended pressure. This will give you a softer ride. If you find that your fork is bottoming out, you can increase the air pressure.

Remember, setting the air pressure is a personal preference.

How do you adjust RockShox Recon forks?

If you find yourself needing to adjust your RockShox Recon forks, there are a few things you’ll need to do. First, you’ll need to find the air valve, which is located on the top of the fork. Once you’ve found the air valve, use a shock pump to add or remove air from the forks.

Next, you’ll need to adjust the rebound damping. The rebound damping controls how quickly the forks return to their original position after being compressed. To adjust the rebound damping, you’ll need to find the knob on the bottom of the fork.

Once you’ve found the knob, turn it clockwise to increase the amount of rebound damping, or counter-clockwise to decrease it. Finally, you’ll need to adjust the compression damping. The compression damping controls how much resistance the forks offer when they’re compressed.

how to put air in rockshox recon

Credit: www.bike-advisor.com

Rockshox air pressure calculator

Rockshox air pressure calculator provides detailed information about the amount of air pressure that should be used in your Rockshox forks. This is important because using too much or too little air pressure can affect the performance of your forks. To use the calculator, simply enter your fork model, travel, and weight.

The calculator will then provide you with a recommended air pressure range. You can then adjust the air pressure until you find the sweet spot for your riding style.

How to put air in rockshox rear shock

If you have a RockShox rear shock, there are a few things you need to do in order to add air to it. First, you need to find the air canister. This is usually located near the bottom of the shock.

Once you have found the air canister, unscrew the cap and insert the air pump. Be sure to not over-inflate the shock, as this can damage it.

How to adjust air fork travel

If your air fork begins to feel too soft or too firm, you can adjust the air pressure to get your desired ride feel. The process is pretty simple and only requires a few tools. First, you’ll need an air pump.

A floor pump with a gauge is ideal, but a hand pump will work in a pinch. Next, locate the air valve on your fork. It’s usually located on the top of the fork near the handlebars.

Once you have the tools you need, simply add or release air from the fork until you achieve your desired fork travel. As a general rule, softer forks are better for absorbing bumps and rough terrain, while firmer forks are better for pedaling efficiency and climbing. If you’re unsure of where to start, consult your fork’s owner’s manual.

It will have recommended air pressure settings for different ride conditions. Or, you can ask a qualified bike mechanic for help.

Rockshox recon 351 air pressure

If you’re a mountain biker, then you’re probably familiar with the Rockshox brand. They make some of the best suspension forks on the market, and their Recon line is no exception. The Recon 351 is an air-sprung fork that’s designed for cross-country and trail riding.

It has a travel of 100mm, and it’s available in both 26″ and 27.5″ wheel sizes. As with most air-sprung forks, the Recon 351 requires that you add air to it in order to get the desired amount of travel. The amount of air pressure that you’ll need to add will depend on your weight, the terrain that you’re riding on, and your personal preferences.

A good starting point is 30% of your body weight in PSI (pounds per square inch). So, if you weigh 150 pounds, you would start with 45 PSI.

Mtb fork air pressure guide

If you’re a mountain biker, then you know that having the right air pressure in your forks is crucial. Too much air and your forks will be stiff and unyielding, making for a harsh ride. Too little air and your forks will bottom out, giving you a jarring, uncomfortable experience.

So how do you find the perfect air pressure for your forks? The first step is to check your forks’ owner’s manual. There will likely be a recommended air pressure range for your specific fork model.

Once you have that range, it’s time to start experimenting. Start by setting your air pressure at the low end of the range. Take your bike out for a spin and see how it feels.

If your forks feel too soft and you’re bottoming out, then increase the air pressure a bit. Keep experimenting until you find the perfect air pressure for your riding style and the conditions you’re riding in.

Rockshox recon air pressure chart

If you’re a mountain biker, then you know that having a properly functioning suspension is key to a great ride. And part of keeping your suspension in good working order is making sure that your air pressure is at the correct level. If you have a RockShox Recon fork, then you can use this air pressure chart to help you get the perfect pressure for your weight and riding style.

Just find your weight range in the chart and then follow the recommended pressure for your riding style. If you’re a cross-country rider, then you’ll want to err on the side of having a little less air pressure in your fork. This will help your fork absorb more small bumps and give you a smoother ride.

But if you’re a downhill rider, then you’ll want to have a little more air pressure in your fork so that it doesn’t bottom out on big hits.

Rockshox air pressure chart

If you’re a mountain biker, then you know that having the right suspension is crucial. And if you have a RockShox fork, then you know that adjusting the air pressure is key to getting the most out of your fork. But what air pressure should you use?

The answer, as with most things in mountain biking, is that it depends. It depends on your weight, the terrain you’re riding, and your personal riding style. But don’t worry, we’re here to help.

We’ve put together a RockShox air pressure chart that provides a starting point for finding the right air pressure for you. First, take a look at the chart below. It provides a range of air pressures for different rider weights.

Find your weight on the left-hand side, and then look across to find the air pressure range that’s right for you. Now, keep in mind that this is just a starting point.

Rockshox air pump

If you have a Rockshox fork, then you need a good air pump to keep it in good working condition. The Rockshox air pump is designed specifically for this purpose. It is a high-quality pump that is made from durable materials.

It comes with a gauge so that you can accurately pump up your fork to the desired pressure. This pump also has a bleed valve so that you can release excess air pressure if needed.

Conclusion

If your bike has a RockShox Recon fork, you may need to add air to it at some point. Here’s a quick guide on how to do that. First, find the air valve on the top of the fork.

It will look like a small Schrader valve. Next, use a shock pump to add air to the fork. The recommended pressure will be printed on the side of the fork.

Once you’ve added the desired amount of air, close the valve and you’re good to go!

You may also like...

1 Comment

  1. […] If the air compressor has a clip that holds the nozzle in place, hook the adapter onto the clip. Put the end of the air hose over the adapter and turn on the compressor. The air will flow through the adapter and fill up […]

Leave a Reply

Your email address will not be published.