How To Remove A Rear Bike Wheel With Hub Gears

17 Comments / By /

If your bike has hub gears, you’ll need to remove the rear wheel to change a flat tyre. It’s not difficult, but you will need a few tools. You’ll need a spoke key to loosen the spokes, and a 15mm wrench or axle nut tool to remove the axle nuts.

You may also need a chain whip to hold the cassette while you loosen the lockring.

How to remove a hub gear rear wheel

How do you remove the rear wheel of a geared bike?

If you need to remove the rear wheel of a geared bike, you’ll need to first remove the derailleur. To do this, you’ll need to first remove the chain from the bike. You can do this by shifting the chain into the smallest cog on the cassette, and then removing the rear axle nut with a wrench.

Next, pull the derailleur hanger away from the frame and remove the derailleur. With the derailleur removed, you can now remove the rear wheel. To do this, first loosen the brake cable so that it’s no longer tensioned.

Next, remove the quick release lever or axle nuts (depending on which type of rear axle your bike has) and then pull the wheel away from the frame. That’s it! You’ve now successfully removed the rear wheel from a geared bike.

How do you change a rear bike tire with gears?

Assuming you have a standard road bike with gears, here are the steps to changing a rear bike tire: 1. First, you’ll need to remove the wheel from the bike frame. To do this, you’ll need to release the brakes (if your bike has caliper brakes, you’ll need to use the quick release lever; if your bike has disc brakes, you’ll need to unscrew the disc brake caliper).

Once the brakes are released, you can loosen the bolts that secure the wheel to the frame. On most bikes, there will be two bolts on the rear axle (one on each side), and you’ll need a wrench to loosen them. 2. With the bolts loosened, you can now remove the wheel from the frame.

To do this, simply pull the wheel towards you (away from the bike frame), and it should come right off.

How do you take the wheel off a Sturmey Archer hub?

Assuming you want to remove the wheel for maintenance: 1. First, you’ll need to disconnect the brake cable from the brake arm. You can do this by loosening the adjusting barrel nut with a 4 or 5 mm hex key.

2. Next, loosen the axle nuts with a 15 mm wrench. You may need to use a chain whip to keep the wheel from turning while you loosen the nuts. 3. Once the axle nuts are loose, you can pull the wheel off the axle.

4. To remove the axle, first remove the dust cap with a small screwdriver or similar tool. 5. Next, use a 15 mm wrench to loosen the locknut on the other side of the axle. 6. Once the locknut is loose, you can unscrew the axle from the hub.

How do you take the back wheel off a Nexus hub?

If you’re planning on doing any maintenance on your Nexus hub, you’ll need to know how to take the back wheel off. Here’s a step-by-step guide on how to do it: 1. Begin by loosening the axle nuts with a wrench.

You’ll need to loosen them quite a bit – enough so that the axle can slide out of the hub. 2. Once the axle is loose, pull it out towards the back of the bike. 3. The wheel should now be free from the hub.

You can now proceed with whatever maintenance you need to do. 4. When you’re finished, reverse the process to put the wheel back on. First, insert the axle into the hub, and then tighten the axle nuts until they’re snug.

how to remove a rear bike wheel with hub gears

Credit: www.freedomfoldingbikes.com

Removing wheel with hub gears

Assuming you mean a wheel with internal hub gears: To remove the wheel, first you’ll need to remove the axle nuts or quick release skewer. For axle nuts, you’ll need a wrench that fits the nut.

For a quick release skewer, you’ll need to open the lever. To do this, unscrew the knob at the end of the lever, and then pull the lever away from the axle. Once the lever is open, you can pull the skewer out of the axle.

With the skewer or axle nuts removed, the wheel should come right off. If it’s stuck, you can try wiggling it or gently tapping it with a mallet. Once the wheel is off, you can proceed to removing the gears.

To remove the gears, you’ll first need to remove the chain. To do this, disconnect the chain from the derailleur.

Hub gear wheel

A hub gear, or just gearhub is a type of gear system for bicycles that is internally geared, meaning the gears are enclosed within the hub of the wheel. This offers several advantages over the more common derailleur system, which has exposed gears that are subject to dirt, debris, and weather. One of the biggest advantages of a hub gear is that it is much more low-maintenance than a derailleur system.

Because the gears are enclosed, they are protected from the elements and don’t require as much cleaning and servicing. Another advantage of a hub gear is that it is much simpler to use. There are no derailleurs or shifters to worry about, so shifting gears is a breeze.

This can be a big advantage for those who are new to cycling or don’t want to deal with the hassle of fiddling with shifting gears.

Removing rear bike wheel no quick release

If you don’t have a quick release on your bike, removing the rear wheel can be a little more challenging. Here’s a step-by-step guide to help you get it done: 1. First, you’ll need to remove the axle nuts.

These are usually located on the inside of the frame near the dropouts. Use a wrench to loosen them, but be careful not to lose them! 2. Next, gently pull the wheel away from the frame.

It may be stuck, so you may need to wiggle it a bit. 3. Once the wheel is free, you can remove the tire if necessary. To do this, simply loosen the rim bolts with a wrench and then pull the tire off.

4. Finally, you can remove the inner tube if desired. To do this, simply deflate the tube and then pull it out through the tire. That’s it!

Shimano nexus rear wheel removal

If you’re in need of a rear wheel removal on your Shimano Nexus, don’t fret – it’s a relatively easy process! Here’s a step-by-step guide to get the job done: 1. First, you’ll need to remove the axle nuts.

You can do this with a standard wrench. 2. Next, remove the brake cable from the brake caliper. 3. With the brake cable removed, you can now remove the wheel.

4. Finally, reinstall the axle nuts, and you’re all set!

Internal gear hub wheel 700c

If you’re looking for a new wheel for your road bike, you may be wondering if you should go with a traditional spoked wheel or an internal gear hub (IGH) wheel. Both have their pros and cons, but if you’re looking for a more durable wheel that is less affected by road conditions, an IGH wheel may be the way to go. Traditional spoked wheels are lighter and generally more affordable than IGH wheels.

However, they are also more susceptible to damage from road debris and potholes. IGH wheels are heavier than traditional spoked wheels, but they are also more durable. The extra weight is due to the internal gear hub, which houses the gears and bearings inside the wheel.

This makes the wheel less likely to be damaged by road conditions and makes it easier to change gears while riding. If you’re looking for a durable wheel that can handle rough roads, an IGH wheel is a good option.

Removing sturmey archer rear wheel

If you’re planning on removing your Sturmey Archer rear wheel, there are a few things you’ll need to keep in mind. First, you’ll need to disconnect the cable from the hub. Next, loosen the axle nuts and remove the wheel.

Finally, remove the cog and sprocket. With the wheel removed, you’ll have easier access to the Sturmey Archer rear hub. This is where you’ll need to remove the cable from the hub.

To do this, simply loosen the clamping bolt and pull the cable out. With the cable removed, you can now remove the axle nuts. Once the axle nuts are removed, the wheel will be free.

You can now remove the cog and sprocket. To do this, first remove the retaining ring. Next, slide the cog off of the axle.

Finally, remove the sprocket by unscrewing the retaining nut.

Conclusion

If your bike has hub gears, you’ll need to remove the rear wheel to change a tyre or to clean the bike. It’s not difficult to remove the wheel, but you will need a few tools. You’ll need a wrench to loosen the axle nuts, and a screwdriver to remove the retaining ring.

You may also need a chain whip to hold the cog while you loosen the axle nuts. To remove the rear wheel, start by shifting the chain onto the smallest cog. Then, use the wrench to loosen the axle nuts.

Once the nuts are loose, remove the retaining ring with the screwdriver. You may need to use the chain whip to hold the cog while you do this. With the retaining ring removed, the wheel should come off easily.

To put the wheel back on, reverse the process.

Scroll to Top